Door Handle Replacement

It's worth it to replace door handles if you don't like the way they look, or if they're difficult to use. With a little patience, you can install the new handle in no time.

Modern door handles are equipped with cover plates that conceal the screws to create a stylish appearance. If your new handle does not have them already attached, you will have to attach them separately.

Remove the handle that was previously used

The door handle isn't just a decorative feature for your home, but it's also a safety feature that allows you to lock and unlock the door. However, over time your door handle can lose its grip, become loose, or appear old and worn. This is an indication that it's time for a replacement.

One of the first signs that your door handle repairs near me handle needs replacing is if it's becoming difficult to operate. This is a problem because it means that you are unable to no longer lock or unlock your upvc door handle repairs near me which could be a security risk for you and your family.

Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle can be very dangerous, especially in the event that your children or senior family members struggle to open it, and get trapped within. It's a good thing that it's easy to fix a broken door handle by simply replacing the handle that was broken.

Modern door handles are typically standard sizes and should be able to fit any door. If you are not certain if your new door handle will work, take off the old one and take measurements of its holes in the housing. This will allow you to purchase the correct size door handle.

It is the easiest way to remove the door handle by removing it from the door. Usually you'll need a screwdriver. Some door handles have the cover plate, which conceals the mounting screws. You will need to remove the cover plate to gain access to the screws. Once you have removed the old handle, make a note of how the spindle is attached to ensure you are able to be sure to align it when you install the new one.

You can also remove the door handle by removing it from the latch mechanism. You can use a screwdriver for removing the door handle. But, you'll have to locate the small latch that is located on the edge cut piece. Once you've removed the latch, you'll need to remove the handle from the strike plate and then remove the latch from the door edge.

Take off the Strike Plate

If you are replacing your handle, you'll need to replace the latch plate that holds the hole which the door's latch hooks into when it closes. The package the new handles arrive in will include two different latch plates - one that is rectangular and the other a circular one (see the diagram above detailing the components of a door handle). If you have a rectangular latch plate, you can replace it with an oval one. This will allow the latch to be able to hook into the strike plate, making the handle easier to use.

The first step is to loosen the screw that holds the latch plate that was previously in place. The screws are usually quite tight and require a lot of force to loosen them. If possible, it may be beneficial to have another person assist you with this task.

After the screws are removed, the latch plate should slide out of the door handle repair plate easily. If the latch plate is stuck or won't move use a small file to scrape the edges. This can sometimes free up the plate.

Now, you can proceed to making the new door strike plate for installation. Utilizing the wood screws that came with the new handles, screw the latch plate to the inside of the doorjamb. Be cautious not to tighten too much the screws, as this can cause damage to the strike plate.

If you're unsure whether the latch plate is in the correct position, shut and then open the door to check whether it latches and closes properly. If it does not then you'll need to adjust the strikeplate upwards or down, or forward or back until the upvc door handle repairs closes correctly.

If the door still moves or jiggles, then you may have to expand your latch hole on the strike plate. This is more frequent on older doors. It could be caused by wear and tear hinges that are too narrow, the wrong size latch or a damaged strike plate. If this is the situation, use a metal filing instead of a chisel or hammer to adjust the strike plate.

Removal of the Latch

The latch is the angled piece of metal that moves between the hole in the inner edge of your door. When you turn the handle, it pushes the latch forward which allows you to open the door. It also connects to an opening in the frame of the door to keep your door closed. If your door wobbles when you close it, an upgrade to the latch could be all that is needed to fix the issue.

The screws that support the door latch are hard to spot however, you can use a screwdriver to make a small hole on the trim plate and pry the latch off. After you've removed your trim plate, it should be simple to take off the latch as well as the remaining bolts that hold the spindle and latch in the position.

If the latch is not easily removed then use a paperclip tool to take it off the handle mechanism. Insert the item in the recessed slot of the latch, and gently twist it or jiggle until you feel handle and latch begin to split. You may need to repeat this several times before the latch is loose enough to let it out.

It should be possible to slide the new latch into its slot with no problems after you have removed the old one. Make sure the latch is properly positioned in the slot and is aligned with the screw chambers and then use the new screws to fasten it to the strike plate and door frame.

Take note of the backset (the distance between the centre of the large hole on the front of the door and the edge) before installing the new handle. Make sure that the size of the latch of the new handle is in line with the measurement.

If you are replacing the latch or handle or handle, or if your previous lock cylinder is damaged, then you'll require an entirely new one. If you're not changing the locks however, a new latch should fit in your existing recess and will be compatible with the keys you have currently. Select a latch with rectangular cover plates to match the handles you have.

Removing the Cover Plate

You can replace your door handles with a contemporary rose and lever designs to make a difference in the appearance of your house. You can buy complete sets of door handles that come with matching escutcheons and privacy adaptor kits.

To replace an internal door handle, remove the cover plate (or rose), which covers the screws and inner mechanism. Use a flathead to remove the plate. It may have an opening on one side or be held by a pin.

Remove the screw holding the handle in the interior and place it aside when the cover plate is removed. You'll also want to remove the screws that are holding the latch and inner plates to the door handle repair, which you can accomplish by loosening them using a Philips screwdriver. Remove the plates that hold the inner plate and latch from the door. Put them away.

Most doors have a gap between the door jamb and the edge of the frame, which allows for a handle, but not all do. If yours does not, you'll need to drill a hole into the door for the new handle. The procedure to do this is the same as for opening a door with a lock, but you'll be taking extra care not to harm the frame or door.

Installing new door knob screws is required after the holes have been made. Make sure you purchase the same size as the old ones, to ensure that you won't have an handle that is either too tight or too loose. Installing a new strike rod and latch is also mandatory. These aren't included in most door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic option if you're in need of a top-quality interior door handle replacement set. It is a factory-fit and has received hundreds of 5-star reviews. It's an excellent option for replacing worn out or damaged interior door hardware on your Chevy.